Epson EH-TW3500
Home Theatre Projectors
Full 1080p High Definition Digital Home Theatre
- click for larger image
- If you are interested in purchasing an Epson Projector please call 0800 377 664 to discuss your requirements or to find projector resellers in your area.
- View EH-TW3500 movie
- Distance CalculatorDownload
- $3599 RRP inc GST
| PRODUCT TYPE | Home Theatre Projectors | ||
|---|---|---|---|
| PRODUCT NAME | Epson EH-TW3500 | ||
| PRODUCT CODE | V11H336053 | ||
| PROJECTION SYSTEM | RGB Liquid Crystal Display | ||
| PROJECTION METHOD | Front / Rear / Ceiling Mount | ||
| SPECIFICATION OF MAIN PARTS | |||
| LCD | Size | 0.74 inches wide D7 panel with MLA | |
| Driving method | Poly-Silicon TFT Active Matrix | ||
| Native resolution | 1080P Full HD (1920 x 1080) | ||
| Pixel number | 6,220,800 pixels (1920 x 1080 pixels) x 3 | ||
| Aspect ratio | 16:9 | ||
| Pixel arrangement | Stripe | ||
| Refresh Rate | 50Hz or 60Hz (based on input signal) | ||
| PROJECTION LENS | Type | manual: zoom / focus | |
| F-number | 2.0 - 3.17 | ||
| Focus length | 22.5 - 47.2mm | ||
| Zoom ratio | 1.0 : 2.1 | ||
| LAMP | Type | 200 W UHE E-TORL Lamp | |
| SCREEN SIZE (PROJECTED DISTANCE) | 30 to 300 inch (0.87m to 9.03m) (Wide) 30 to 300 inch (1.88m to 19.15m) (Tele) |
||
| LENS SHIFT RANGE | Vertical: 96.3% max. (upward & downwards) Horizontal: 47.1% max. (Left and Right) |
||
| BRIGHTNESS | |||
| Normal Mode | 1,800 Lumens Light Output 1,800 Lumens Colour Light Output Colour Mode ( Dynamic, Zoom: Wide, Lens shift: V 5:5 / H Centre ) |
||
| CONTRAST | 36000:1 (Colour mode: Dynamic, Power consumption:
Normal, Zoom: Wide, Lens shift: V 10:0 / H Center) * Contrast = 100% White (Iris: Open) / Black (Iris: Close) ) |
||
| COLOUR PROCESSING | Full 10 bit | ||
| COLOUR REPRODUCTIVITY | Full Colour (1.07 Billion Colours) | ||
| COLOUR SPACE | 115% of NTSC | ||
| VIDEO QUALITY | Interlace - Progressive conversion 3D Y/C separation, Noise reduction | ||
| EFFECTIVE SCANNING FREQUENCY RANGE (Digital) | |||
| PIXEL CLOCK | 13.5MHz to 150MHz | ||
| HORIZONTAL | 15 to 80KHz | ||
| VERTICAL | 24, 50 to 85Hz | ||
| ADJUSTMENT FUNCTION | |||
| PROJECTOR / REMOTE CONTROL | Brightness / Contrast / Tint / Saturation / Input signal etc. | ||
| TILT ANGLE | 0 to 8 degrees | ||
| KEYSTONE CORRECTION | N/A | ||
| EPSON CINEMA FILTER | Controlled automatically with colour mode (ON: Theatre Modes / Natural, OFF: Living Room / Dynamic) | ||
| AUTO IRIS | Controlled automatically adjusting to video source (Available at colour mode except x.v.Colour, User selectable High Speed/Normal/Off on OSD) |
||
| EPSON SUPER WHITE | Controlled automatically adjusting to video source (Available at Natural / Theatre / Theatre black 1 / Theatre black 2, User selectable On/Off on OSD) |
||
2:2 Pull Down (1080p/24fps) |
On/Off (Default off, HDMI & Component input) |
||
| ANALOGUE RGB I/O | |||
| DISPLAY PERFORMANCE | Native | 1080p | |
| Resize | 1280 x 1024 / 1360 x 768 / 1024 x 768 / 800 x 600 / 640 x 480 | ||
| INPUT SIGNAL | Signal type | Separate signal | |
| Video signal | Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 75ohm) | ||
| Sync.signal | Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp) | ||
| INPUT TERMINAL | Video | Mini D-sub 15 pin x 1 Blue molding | |
| HDMI Ver.1.3 | |||
| DISPLAY PERFORMANCE | Native | 1080p | |
| Video standard | 576i / 480p / 576p / 720p / 1080i / 1080p | ||
| Video signal | TMDS ( Signal for HDMI) | ||
| Input Terminal | HDMI x 2 (HDCP) | ||
| VIDEO I/O | |||
| COMPONENT INPUT | |||
| INPUT SIGNAL | Video standard | 480i / 576i / 480p / 576p / 720p / 1080i / 1080p | |
| Video signal | Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y) | ||
| INPUT TERMINAL | RCA x 3 (Red / Green / Blue) | ||
| COMPOSITE / S VIDEO | |||
| INPUT SIGNAL | Video standard | NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM | |
| Video signal | Composite Video (1.0Vpp / Sync.negative, 75 ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm) | ||
| INPUT TERMINAL | S-Video | Mini DIN x1 | |
| Composite Video | RCA (Yellow) x 1 | ||
| CONTROL I/O | |||
| SERIAL I/O | I/O terminal | D-sub 9 pin x 1 |
|
| I/O signal | RS-232c | ||
| TRIGGER OUT |
|
3.5 mm mini-jack x 1 | |
| Output Signal | Power on: 12v DC, 200mA max Power off: 0v | ||
| LOCK FUNCTION | Operation Lock & child-lock | ||
| OPERATING TEMPERATURE | 5°C to 35 °C (41°F to 95 °F) at 20% ~ 80% Humidity | ||
| DIRECT POWER ON | Yes | ||
| COOL-DOWN PERIOD | Approx 16 seconds | ||
| POWER SUPPLY VOLTAGE | 100-240 VAC ±10%, 50/60Hz | ||
| POWER CONSUMPTION | 269W (Normal Mode) | ||
| DIMENSIONS | |||
| EXCLUDE FEET | 450mm(W) x 360mm(D) x 136mm(H) | ||
| MAXIMUM DIMENSION | 450mm(W) x 390mm(D) x 145mm(H) | ||
| WEIGHT | Approx. 7.3 kg | ||
| FAN NOISE | |||
| HIGH BRIGHTNESS MODE | 29dB (Colour mode: Dynamic) | ||
| WHISPER MODE | 22dB (Colour mode: Theatre Black 1 and 2) | ||
| ACCESSORIES | |||
| POWER CORD | 3m | ||
| REMOTE CONTROL | Stick type (backlight) | ||
| BATTERY | Alkaline, AA x2 (Included) | ||
| USER'S MANUAL | Included (CD-Rom) | ||
| LENS CAP | Included | ||
| WARRANTY* | 2 years | ||
| * excluding lamp | |||
| * For more information visit Epson Projector Warranty | |||
| PRODUCT OPTIONS | |||
| Product Code | Item Code | Description | |
| V13H010L49 | V13H010L49 | Lamp | |
| Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice. | |||
A Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.
Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.
