PROJECTION SYSTEM	RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD	Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD
Size	0.9 inches without MLA (x3)
Driving method	Poly-Silicon TFT active matrix
Pixel number	786,432 (1024 x 768) x 3
Native resolution	XGA
Aspect ratio	4:3
Pixel arrangement	Stripe
PROJECTION
Type	Manual: zoom / focus
f-number	1.9 to 2.1 (+/- 3%)
f-number	31 to 36 (+/- 3%)
Zoom ratio	1:1.16
Lens cover	attached
LAMP
Type	150 W UHE
OPTICAL SYSTEM	Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE)	30 to 300inch (1.0 to 11.7m)
KEYSTONE CORRECTION RATIO	9:1
BRIGHTNESS	1500 Lumens
CONTRAST	400:1
BRIGHTNESS UNIFORMITY	85% (TYP)
COLOUR REPRODUCTIVITY	Full colour (16.7 million colours)
SOUND OUTPUT	1W
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK	13.5MHz to 162MHz
HORIZONTAL	(15 - 92) KHz
VERTICAL	(50 - 85) Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL	Keystone (Vertical) / Brightness / Contrast / Tint / Saturation / Sound / Input signal etc.
KEYSTONE CORRECTION	Vertical -15 to +15 degrees
TILT ANGLE	0 to 11 degrees
ANALOGUE RGB / YUV I/O
DISPLAY PERFORMANCE
Native	1024 x 768 dots
Resize	1600 x 1200 / 1280 x 1024 / 800 x 600 / 640 x 480 dots
INPUT SIGNAL
Signal type	Separate signal
Video signal	Analogue (0.7Vp-p,75 / Mac0.714Vp-p,75 ) Sync. signal Separate (positive & negative, bi-polarity 1-5Vp-p) / Composite (positive & negative, bi-polarity 1-5Vp-p) / Sync-on-green (negative.0.3Vp-p)
Audio signal	500m Vrms / 47 K
INPUT TERMINAL
Video	Mini D-sub 15 pin x 1
Audio	Stereo mini jack
VIDEO I/O
DISPLAY PERFORMANCE	NTSC: 550 LINE PAL: 550 LINE (Depend on observation of the multi burst pattern)
INPUT SIGNAL
Video standard	NTSC / NTSC4.43 / PAL / M-PAL N-PAL / PAL60 / SECAM
Video signal	Composite video (1.0Vp-p / Sync.Negative, 75) / S-Video (Luminous 0.714Vp-p, chrominous 0.286Vp-p, 75 / Component video (Analogue Y level 0.7V 75 / CR CB level +/- 0.35V 75 / Sync. Negative 0.3V or 3-state +/-0.3V on Y) Video-RGB 0.7Vp-p, 75 / MAC 0.714Vp-p, 75
Audio signal	500m Vrms / 47 K
INPUT TERMINAL
Video	Composite Video: RCA x 1 / S-Video: Mini DIN / Component Video: Mini D-sub 15pin (in common with Analogue RGB connector) / Video-RGB: Mini D-sub 15pin (in common with Analogue RGB connector) Audio Stereo mini jack (in common with Analogue RGB audio jack)
CONTROL I/O
I/O TERMINAL	USB connector series B x1 (for mouse, K/B, control)
OPERATING TEMPERATURE	5°C to 35°C (41°F to 95°F) (20% to 80% Humidity)
POWER SUPPLY VOLTAGE	100 - 120V / 200 - 240V ±10%, 50/60Hz AC
DIMENSION
EXCLUDE PROJECTION LENS & FEET	190(D) x 276(W) x 70(H)mm
MAXIMUM DIMENSION	190(D) x 276(W) x 78.5(H)mm
WEIGHT	Approx. 4.3lbs / 1.9Kg
FAN NOISE	39dB
ACCESSORIES
Power cable (1.8m), Computer cable (1.8m,Mini D-sub 15pin (Male) - Mini D-sub 15pin(Male)), Video cable (RCA Yellow), Mouse cable (USB Mouse cable), Remote Control, Soft Carrying Bag, User's manual
*Specifications are subject to change without notice due to technological improvements.

Product Options

For your nearest Epson Data/Video Projector Dealer please call: 1800 652 726 Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.