| SIZE & TYPE |
| Max Print Size |
0.21 x 1m (borderless) |
| Description |
Compact Commercial Photo Printer |
| Form Factor |
Desktop |
| PRINT TECHNOLOGY |
| Main Print Head |
Epson Micro Piezo™ TFP with VSDT, Auto Nozzle Checking & Auto Ink drop Detection |
| Print Mode |
Bi-directional |
| Nozzle Configuration |
180 per colour |
| Maximum Resolution |
1440 x 720dpi (Gloss / Lustre / Matte) |
| Minimum Ink Droplet Size |
2.5pl |
| Back Print Head |
N/A |
| INK SYSTEM |
| Family |
Epson Ultrachrome™ D6-S  |
| Type |
Aqueous Dye |
| Colours |
C+Y+M+K+Lm+Lc  |
| Cartridges |
200ml per colour |
| PRINT PERFORMANCE |
| Time to Start Up |
120s |
| Time to Shut Down |
15s |
| Time to First Print |
45s from standby / 110s from sleep |
| Speed Gloss/Lustre (720x360dpi) |
545 5" x 3.5" prints per hour
430 6" x 4" prints per hour
140 8" x 10" prints per hour |
| Standard Gloss/Lustre (720x720dpi) |
455 5" x 3.5" prints per hour
360 6" x 4" prints per hour
120 10" x 8" prints per hour |
| Quality Gloss/Lustre/Matte (1440x720dpi) |
225 5" x 3.5" prints per hours
180 6" x 4" prints per hour
60 10" x 8" prints per hour |
| Figures are provided for comparison purposes only. They represent average and/or typical times based on internal Epson testing using a directly connected printer. Print speeds are based on a job containing 20 natural RGM jpeg images with 31 prints made borderless, computed from the time taken for the first print to exit to the last. Actual performance will vary depending on factors including the number of prints in each job, the individual image types, sizes and resolution, printer connection, PC performance, environmental condition, print mode, media type and media size. If a series of photos are sent individually they will take longer to print than a job containing multiple photos and will result in increased media wastage due to feed management. A small amount of media wastage occurs between all prints to ensure consistent quality output. |
| PRINT MEDIA SUPPORT |
| Roll Format |
Single roll with 3" core, 200-300gsm, max 65m long |
| Roll Specifications |
102mm (4"), 127mm (5"), 152mm (6"), 203mm (8") & 210mm (A4) widths, max 4kg |
| Max Print Width |
210mm (A4) |
| Print Lengths |
89mm (3.5”) to 1000mm (39.37”) |
| Loading Method |
Spindle Based |
| Media Support |
Epson Gloss, Lustre & Matte paper (see the Consumables tab for a full list of current approved media) |
| Print Format |
Bordered and Borderless |
| Media Handling |
Auto Cutter & Output Heater |
| Waste Management |
Integrated front panel paper cut waste bin & replaceable waste ink (maintenance) tank |
| Output Method |
Front with optional Standard Print Tray (supports up to 5” x 8”), optional Large Media Tray |
| OPERATION |
| Control Panel |
Colour LED status lights + warning alarm |
| Colour Modes |
Adobe RGB, SRGB, ICM, manual correction & no correction |
| Interface |
USB 2.0 High Speed |
| Compatibility |
Operation with standard printer driver: Core2 Duo 2GHz or better processor with Win 7 Pro/Ultimate (32/64bit) / Mac OSX 10.5.8 or higher with 1GB memory or greater (4GB recommended) & 32MB or more storage (500GB recommended)
Operation with optional Order Controller: Windows 7 Pro/Ultimate (32/64bit) or higher, 2GB memory (4GB or more recommended), 250MB storage (500GB or more recommended), 1280x1024 24-bit or higher display, Core2Duo 2GHz or equivalent (Core i5 2.5GHz or faster recommended) |
| Physical (WxDxH) |
460 x 430 x 354mm, 23Kg (no output tray or consumables) |
| Duty Cycle |
100,000 prints* |
| ENVIRONMENT |
| Paper Storage |
15° to 25° C, 20 to 80% Humidity (Gloss, Lustre & Matte media) |
| Operational Temp |
10° to 35° C (Gloss & Lustre media) / 15° to 25° C (Matte media) |
| Operating Humidity |
20 to 80% (Gloss/Lustre media, no condensation) / 40 to 60% (Matte media, no condensation) |
| Power Supply |
100 - 240 V AC, 50/60 Hz, 1.5A @ 220-240V |
| Power Consumption |
120W Operating, 6W Sleep |
| Operating Noise |
55dB |
| Installation Requirements** (WxHxD) |
Printer Only: 520 x 354 x 460mm, 23Kg
Printer with Standard or Large media output tray: 520 x 354 x 760mm, 23.5Kg |
| SHIPPING INFO |
| Packaging Dimensions*** (WxHxD) |
Printer: 681 x 539 x 601mm, 27.5Kg including pallet
Standard Output Tray: 387 x 232 x 215mm, 0.4Kg
Additional Spindle: 327 x 259 x 249mm, 1Kg |
| What’s in the Box |
Printer, Power Cord, 5m USB Cable, 200ml Ink set, 1 x Media Spindle, 1 x Maintenance Tank, Set-Up Guide, User Guide & Warranty Info, Windows & Macintosh Printer Driver & System Software on CD.
The Photo Pack includes an additional Media Spindle, Standard Print Tray, Order Controller software, a Paper Storage Case, 2 x Gloss, 2 x Lustre & 1 x Matte media rolls.
NOTE: A proportion of the included ink will be required to 'prime' the printer and it is recommended that an additional set be purchased to enable subsequent production work. |
| Delivery & Install |
Delivery and installation is not included. If required it can usually be organised by Epson authorised Commercial Printer Dealers at an additional charge. Some assembly and configuration may be required and should be discussed with your dealer. |
| Service & Support |
Support and Service is provided via authorised Epson authorised Commercial Printer Dealers. If you have a problem with a SureLab printer, a related option or consumable please contact your dealer for initial problem evaluation. Should a printer require service this will be provided on-site free of charge within the period covered by your Warranty and any optional CoverPlus Pack. Travelling charges may apply for equipment located outside major metro areas &/or with difficult access
IMPORTANT: Provision of service and support is subject a range of conditions including correct installation, operation in an appropriate environment, regular and appropriate user maintenance (as directed by the machine &/or in the user manual), and use of correct Epson consumables including ink, media, ribbons, and maintenance items (details can be found on the consumables tab of this web site). Customers are recommended to review the Epson's SureLab Printer Warranty for additional terms and conditions prior to purchase. |
| CONFIGURATION OPTIONS |
| SLD7001Y |
Printer with 1Yr Warranty |
| SLD7003Y |
Printer with 1Yr Warranty + 2Yr CoverPlus On-Site Service Pack**** = Total 3 Yrs Cover |
| SLD7001YP |
Printer + Photo Pack with 1Yr Warranty |
| SLD7003YP |
Printer + Photo Pack with 1Yr Warranty + 2Yr CoverPlus On-Site Service Pack**** = Total 3 Yrs Cover |
| OPTIONAL ACCESSORIES |
| C12C811421 |
Additional Media Spindle |
| C12C891171 |
Standard Print Tray |
| C12C891181 |
Large Print Tray |
| C12C843926 |
Epson Order Controller software |
| C12C848061 |
Epson Layout & ID Software (requires Order Controller) |
| 1YWSLD700 |
1 Year CoverPlus On-Site Service Pack**** |
| 2YWSLD700 |
2 Year CoverPlus On-Site Service Pack**** |
| RELATED PRODUCTS |
| SLD3000SR |
SureLab D3000 Heavy Duty Commercial Photo Printer (Single Roll) |
| SLD3000DR |
SureLab D3000 Heavy Duty Commercial Photo Printer (Dual Roll) |
| P5070 |
SureColor 17" Large Format Photo & Graphics Printer |
| P7070 |
SureColor 24" Large Format Photo & Graphics Printer |
| P9070 |
SureColor 44" Large Format Photo & Graphics Printer |
| PP-100III |
DiscProducer CD/DVD (100 disc capacity) |
* This is the maximum number of prints (6”x4”) that the major mechanical &/or electrical components are rated for before requiring overhaul &/or replacement. The duty cycle rating does not represent a warranty against component or system failure.
** Weight rating does not include media or consumables. Allowance should be made for an additional 7kg.
*** Consumables, media & documentation may be shipped separately with additional volume and weight. |
| ****Printers are covered by a comprehensive 1 year warranty that covers all non-consumable parts (Including Print Heads) & labour with free-on-site service in nominated metro areas (locations outside these will attract an additional travelling charges). Cover can be extended up to a maximum of 3 years through purchase of optional CoverPlus packages. Important: Cover may be restricted or denied if the user does not perform maintenance & cleaning as outlined in the user guide, if equipment is used outside of specification &/or with consumables other than those recommended by Epson New Zealand. Please refer to the warranty section of this web site for additional details and contact Epson or one of our Authorised Resellers if you have questions. |
