| SIZE |
|
| Max Media Width |
24 inch wide (610mm) |
| PRINT TECHNOLOGY |
| Print Head |
PrecisionCore TFP with VSDT and Auto Head Alignment |
| Print Modes |
Uni & Bi-directional |
| Nozzle Configuration |
800 per colour |
| Maximum Resolution |
2400 x 1200dpi |
| INK SYSTEM |
|
| Family |
Epson Ultrachrome® Dye Sublimation |
| Type |
Dye Sublimation |
| Colours |
SC-F560: CMYK / SC-F561: CFyFpBk* |
| Supply |
4 x 106ml Tank System |
| Refills |
140ml Bottles
|
| *Ink sets are not interchangeable between models |
| PERFORMANCE |
| Fast Fabric |
21m2/hr |
62s per A1 (2 pass @ 600x1200dpi) |
| Standard Fabric / Fast Rigid |
7.5m2/hr |
208s per A1 (7 pass @ 1200x1200dpi) |
| Max Quality |
4.5m2/hr |
350s per A1 (12 pass @ 2400x1200dpi) |
| Figures represent print times only based on the test sample image as shown, produced on Epson Multi-Purpose DS Paper using Epson Edge Print. The total throughput time for a particular job will depend on a number of factors including the PC specification, RIP application, workflow configuration, networking, file format / size, image content, paper type, print mode, Auto-Take-Up activation and Heater activation. |
 |
| MEDIA SUPPORT |
|
| Handling |
Roll and sheet media with auto-switching |
| Roll Format |
Epson General Purpose Transfer Paper (single roll with spindle loading) |
| Sheet Format |
Epson General Purpose Transfer Paper (A3/A4 with 50 sheet max pop-up feeder) |
| Minimum Margins |
3mm top, bottom, left & right (45mm top & 15mm bottom for optimum quality) |
| Output |
Single sheet with auto-cutter and hold on exit
Supplied with an A4/A3 output tray |
| OPERATION |
|
| Control Panel |
4.3” Colour LCD touch screen |
| Interface |
USB 3.0 & Ethernet 10Base-T/100Base-TX/1000Base-T, WiFi & WiFi Direct |
| Memory |
1GB RAM |
| Included Software |
Windows
Printer Driver, EpsonNet Setup, EpsonNet Print, EpsonNet Config, Epson Software Updator, LFP Print Plug-in for Office and Epson Edge Print on CD
Firmware Updater, EpsonNet Setup Manager & Epson Accounting Tool via web download
Mac
Printer Driver, EpsonNet Config, Epson Software Updater, Firmware Updater and Software Uninstaller via (Web download) |
| System Requirements |
Windows
10/8.1/8/7(32/64bit) or later (64bit required for Edge Print), Core 2 Duo 3.05GHz or greater Processor, 2GB RAM (4GB recommended), 32GB HDD (250GB recommended)
Mac
OSX 10.7 / OS 10.12 or later, Core2Duo 3.05GHz or greater Processor, 1GB RAM, 32GB HDD (250GB recommended) |
| ENVIRONMENTAL |
|
| Physical (WxHxD) |
970 x 245 x 577mm, 29kg (no consumables, stand, or output tray, ASF closed) |
| Power Supply |
AC 220~240V, 50/60Hz, 1.4A |
| Operational Temp |
10°~35°C (15°~25°C recommended) |
| Operational Humidity |
20 to 80% with no condensation (40-60% recommended) |
| Power Consumption |
22W Operating, 8W Standby, 1.6W Sleep |
| Operating Noise |
49dB |
| Recommended Operational Space (WxHxD) |
Desktop: 1020 x 395 x 1035mm
Floor-standing: 1020 x 1078 x 1000mm
(additional space will be required for a heat press) |
| SHIPPING INFO |
|
| Packaging (WxDxH) |
Printer: 1106 x 718 x 558mm, 50Kg
Ink & Media Pack: 450 x 250 x 250mm, 5Kg |
| What's in the Box |
Printer, 2 x Ink Bottle Set, 2 x Maintenance Tank, Sample Media Pack, Power Cord, Setup Guide, Software & User Manual CD. |
| Installation & Operation |
A heat press will be required to enable production; details on models, features and pricing can be provided by your Epson Authorised Large Format Fabric Dealer.
Some assembly and configuration will be required. A set-up guide is included to assist with this process.
Two ink sets and 2 maintenance tanks are included with this printer; a proportion of the first set and one of the maintenance tanks will be used to ‘prime’ the printer during initial set-up.
This printer is designed to be used with specific Epson media. While use of alternative media may be possible Epson is unable to provide any guidance or guarantees in regards reliability, performance, print or sublimation quality.
Delivery, de-boxing and package removal is not typically included but can be provided at an additional charge for most locations. Reliable operation requires the printer to be used on a regular basis and not left powered down for extended periods. The printer is not designed for mobile operation and prior to transport it is recommended that ink be removed. Dye sub ink is extremely stable once sublimated however care must be taken prior to this; unopened bottles should be stored in a cool environment away from sunlight and consumed by the best before date printed on the package, ink should be consumed within one month of loading into tanks, opened bottles should be consumed within 6 months, and prints should be sublimated within a week of creation (1~2 days recommended).
This printer is designed to operate with specific consumables and be used for ad-hoc / low volume work. It does not suit applications which require continuous &/or high volume production. Please refer to the warranty section for details on operational and mechanical life rating limitations. |
| CONFIGURATION OPTIONS** |
| SCF5601YR |
Standard Model with 1Yr Warranty |
| SCF5603YR |
Standard Model with 1Yr Warranty & 2Yr CoverPlus (3 yrs total cover) |
| SCF5611YR |
Fluro Model with 1Yr Warranty |
| SCF5613YR |
Fluro Model with 1Yr Warranty & 2Yr CoverPlus (3 yrs total cover) |
| ACCESSORIES & OPTIONS** |
| C12C933151 |
Optional Stand with media bin |
| C12C933211 |
Additional Roll Media Spindle |
| 1YWF560 |
1Yr CoverPlus On-Site Service Pack |
| 2YWF560 |
2Yr CoverPlus On-Site Service Pack |
| 1YWF561 |
1Yr CoverPlus On-Site Service Pack |
| 2YWF561 |
2Yr CoverPlus On-Site Service Pack |
| SERVICE & SUPPORT |
|
**Printers is supplied with a comprehensive 1 year warranty that covers labour and all non-consumable parts (including Print Heads but excluding the tank system). It provides for free-on-site repair of equipment located in nominated metro areas (on-site service can be provided in location outside of these subject to imposition of a travelling charge). Cover can be extended up to a maximum of 3 years through purchase of optional CoverPlus packages either with the printer or up to 365 days subsequent to purchase (discounts apply for bundled purchase). CoverPlus provides additional cover for the tank system while extending the base parts and labour cover.
Support and Service is provided via authorised Epson authorised Large Format Fabric Dealers. If you have a problem with a SureColor Fabric printer, a related option or consumable please contact your dealer for initial problem evaluation. Should a printer require service this will be provided on-site free of charge within the period covered by your Warranty and any optional
Important: Warranty and CoverPlus may be restricted or denied if the user does not perform maintenance & cleaning as outlined in the user guide &/or advised by Epson Australia or New Zealand, if equipment is modified, used outside of specification &/or with non-Epson consumables. Please refer to the warranty section of this web site for details and contact Epson or one of our Authorised Resellers if you have questions. |
| |
|
