PRINTER TYPE | Monochrome |
PRINTING METHOD | Laser beam browse and one constituent dry
electrophotographic printing |
RESOLUTION | 600 or 300dpi with BiRiTech
(Bi Resolution Improvement Technology)
1200dpi Class with MicroGray 1200 |
PRINTING SPEED | 12ppm (A4, Letter) |
PAPER HANDLING |
PAPER FEED METHOD | Multi Purpose Retractable Paper Tray |
Capacity: |
150 sheets |
Paper Size: |
A4, A5, B5, Legal, Letter, Half-Letter, Executive, G-Letter, Government Legal,
Government Letter, F4 |
Envelopes: |
Monarch, DL, Commercial 10, International B5, C5, C6, Custom |
MANUAL FEED |
Capacity: |
1 sheet |
Paper Size: |
(Any size within feedable paper size) |
FEEDABLE PAPER DIMENSIONS |
Width: |
76mm-216mm (3"-8") |
Length: |
127mm-356mm (5"-14") |
PAPER THICKNESS | 60-163g/m2 |
PAPER EJECT/CAPACITY | Face down (maximum 100 sheets) |
INTERFACES |
STANDARD | IEEE1284 Bi-directional Parallel interface with Compatibility
mode, Nibble mode and ECP mode Universal Serial Bus (USB) 1.1 compliant |
MEMORY |
|
2MB (expandable to 13MB by EDO RAM) |
WARM-UP TIME |
|
21 seconds (from Power On) |
|
11 seconds (from Standby) |
FIRST PRINT TIME |
|
Less than 15 seconds (A4/Letter, 600dpi) |
ACOUSTIC NOISE |
STAND-BY | Below 30dB (A) |
DURING OPERATION | Below 49dB (A) |
RELIABILITY |
DURABILITY | 5 years or 180,000 sheets, whichever comes first |
ENVIRONMENTAL CONDITIONS (OPERATING) |
TEMPERATURE | 10-35_ (50-95_F) |
HUMIDITY | 15-85% RH |
POWER REQUIREMENTS |
POWER SUPPLY/FREQUENCY | AC 220V-240V 50-60Hz ±3Hz |
POWER CONSUMPTION |
Operation: |
Below 850W |
Standby Mode: |
Below 15W |
DIMENSIONS |
|
399(W) x 263(D) x 256(H)mm |
WEIGHT |
|
7.9kg (including the photoconductor unit & and toner cartridge) |
PRINTER DRIVER UTILITY |
STANDARD | Microsoft® Windows® 95/98/ME/2000/NT™ 4.0 |
Epson STATUS MONITOR 3 | Microsoft® Windows® 95/98/ME/2000/NT™4.0
Mac™ OS 8.1 to 9.X |
SYSTEM REQUIREMENTS |
WINDOWS ENVIRONMENT |
Minimum Requirement: |
CPU Pentium 100MHz 16MB RAM Interface IEEE1284 nibble ECP or USB+, Microsoft®
Windows® 95/98/ME/XP/2000/NT™ 4.0 |
Recommended: |
CPU Pentium 233MHz or higher, 64MB RAM or more, Interface IEEE1284 nibble ECP
or USB+, Microsoft® Windows® 95/98/ME/2000/NT™ 4.0 (+ Windows 95® NT™ 4.0 does
not support USB) |
MACINTOSH ENVIRONMENT |
Minimum Requirement: |
Power Mac™ G3/G4 with standard USB or iMac™ 233MHz, 32MB RAM Interface Internal
USB (optional USB board is not supported), Mac™ OS 8.1 to 9.X |
Recommended: |
Power Mac™ G3/G4 with standard USB or iMac™ 233MHz or higher, 64MB RAM or more,
Interface Internal USB (optional USB board is not supported), Mac™ OS 8.1 to
9.X |
Equipment supplied by Epson Australia is designed to function in conjunction with
genuine Epson consumables and accessories specifically configured for it.
This printer is designed to function only with genuine Epson ink cartridges and not with third party ink cartridges. The printer may not function properly or at all if you use third party ink cartridges.