Epson EMP-TW700

Epson EMP-TW700

Home Theatre Projectors

The ultimate cinema experience in the comfort of your own home



PRODUCT TYPE Home Theatre Projectors
PRODUCT NAME Epson EMP-TW700
PRODUCT CODE V11H244053
PROJECTION SYSTEM D5 Liquid Crystal Display
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.7 inches wide MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 1280 x 720 pixels
  Native resolution 720P
  Aspect ratio 16:9
  Pixel arrangement Stripe
  Refresh Rate 50Hz or 60Hz (based on input signal)
PROJECTION LENS Type manual: zoom / focus
  F-number 2.0 - 3.17
  Focus length 22.5 - 47.2mm
  Zoom ratio 1.0:2.1
LAMP Type 170 W UHE E-TORL Lamp
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch (0.93 to 9.61m) (Wide)
30 to 300 inch (2.00 to 20.35m) (Tele)
LENS SHIFT RANGE Vertical: 102.3% max. (upward & downwards)
Horizontal: 50% max. (Left and Right)
BRIGHTNESS
  High Brightness Mode 1600 Lumens
Colour Mode ( Dynamic, Zoom: Wide, Lens shift: Full, Auto iris: On )
CONTRAST 10000:1 ( Colour Mode: Dynamic, Zoom: Wide, Lens shift: Full, Auto iris: On )
BRIGHTNESS UNIFORMITY 87.9%
COLOUR REPRODUCTIVITY 10bit colour processing
COLOUR SPACE 134% of sRGB
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK 13.5MHz to 110MHz
HORIZONTAL 15 to 92KHz
VERTICAL 50 to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone (Vertical) / Brightness / Contrast / Tint / Saturation / Input signal etc.
TILT ANGLE 0 to 2.1 degrees
KEYSTONE CORRECTION Vertical: -15 to +15 degrees ( Zoom: Tele )
Epson CINEMA FILTER Controlled automatically with color mode (ON: Theatre Black 1 and 2 / Natural / s-RGB, OFF: Living Room / Dynamic)
AUTO IRIS Controlled automatically adjusting to video source. (Available at all colour modes; user selectable ON/OFF on OSD)
Epson SUPER WHITE Controlled automatically adjusting to video source (Available at Natural/Theatre/Theatre Black 1 and 2; user selectable ON/OFF on OSD)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 750P
  Resize 1280 x 1024 / 1280 x 768 / 1360 x 768 / 1024 x 768 / 800 x 600 / 640 x 480 / 525i / 625i / 525p / 625p / 1125i
INPUT SIGNAL Signal type Separate signal
  Video signal Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) /
Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL Video Mini D-sub 15 pin x 1 Blue molding
VIDEO I/O
COMPONENT INPUT
INPUT SIGNAL Video standard 525i / 625i / 525P / 625P / 750P / 1125i
  Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
INPUT TERMINAL   RCA x 3 (Red / Green / Blue) x 2, D4 video
COMPOSITE / S VIDEO
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync.negative, 75 ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
INPUT TERMINAL S-Video Mini DIN
  Video RCA (Yellow) x 1
HDMI
DISPLAY PERFORMANCE Native 750P
INPUT SIGNAL Video Standard 525i / 625i / 525P / 625P / 750P / 1125i
  Video Signal TMDS ( Signal for HDMI)
INPUT TERMINAL Video HDMI (High Definition Multimedia Interface) x 1
CONTROL I/O
SERIAL I/O I/O terminal D-sub 9 pin x 1
  I/O signal RS-232c
LOCK FUNCTION Operation Lock & child-lock
OPERATING TEMPERATURE 5°C to 35 °C <41°F to 95 °F>
DIRECT POWER ON Yes
COOL-DOWN PERIOD Approx 30 seconds
START-UP PERIOD To lamp on: Approx 10 seconds
POWER SUPPLY VOLTAGE 100-240 VAC ±10%, 50/60Hz
POWER CONSUMPTION 240W (Lamp High), 200W (Lamp Low)
DIMENSIONS
EXCLUDE FEET 406mm(W) x 310mm(D) x 124mm(H)
MAXIMUM DIMENSION 406mm(W) x 353mm(D) x 143mm(H)
WEIGHT Approx. 5.4kg
FAN NOISE  
HIGH BRIGHTNESS MODE 33dB (Colour mode: Dynamic)
WHISPER MODE 26dB (Theatre Black 1 and 2)
ACCESSORIES
POWER CORD 3m
REMOTE CONTROL Stick type (backlight)
BATTERY Alkaline, size AA x2
USER'S MANUAL Included
LENS CAP Included
WARRANTY* 2 years
* excluding lamp  
* For more information visit Epson Projector Warranty
PRODUCT CODE V11H244053

Product Options

Product Code Item Code Description
V13H010L39 V13H010L39 Lamp
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson New Zealand is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.