Epson EB-X8

Epson EB-X8

Corporate Portable Multimedia Projectors

Bright, Stylish and Compact. Versatile Projectors for Business and Education


Overview Specs Consumables Downloads

PRODUCT TYPE Entry Level Multimedia Projectors
PRODUCT NAME Epson EB-X8
PRODUCT CODE V11H311053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.55 inches without MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels (1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Cross Stripe
  Refresh Rate 50Hz-60Hz
PROJECTION LENS Type Optical zoom / Manual focus
  F-number 1.58 - 1.72
  Focal length 16.9mm – 20.28mm
  Zoom ratio 1.0 ~ 1.2 Optical
LAMP Type 200W UHE
  Life (estimated) 5000Hr ( Low Brightness )# 4000Hr ( High Brightness )#
#Subject to operation and environmental conditions.
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch [0.9 to 9.0m] (Zoom: Wide),
30 to 300 inch [1.08 to10.8m] (Zoom: Tele)
LIGHT OUTPUT (Brightness)
  Normal Mode 2,500 Lumens Light Output
2,500 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide)
  Eco Mode 1,960 Lumens Light Output
1,960 Lumens Colour Light Output
(Colour mode: Game, Zoom: Wide)
CONTRAST 2000:1 (Auto Iris On)
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VIDEO QUALITY Simple Interlace-Progressive conversion
SOUND OUTPUT 1W monaural
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOG)
PIXEL CLOCK 13.5MHz to 162MHz up to UXGA 60Hz
HORIZONTAL 15KHz to 92KHz
VERTICAL 50Hz to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Brightness / Contrast / Tint / Saturation / Sharpness / Input Signal
Colour Temperature / Tracking / Position / Sharpness / Volume e.t.c.
FOOT ADJUSTER Front-centre
TILT ANGLE 0 to 12 degrees
AUTO KEYSTONE CORRECTION Vertical: -30 to +30 degrees
PASSWORD PROTECTED FUNCTION
(security function)		 Implemented
OTHER FUNCTION
USB Display Display Performance - Native - 1024 x 768
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7V p-p, 75ohm / Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500mVrms / 47K-ohm
INPUT TERMINAL Video D-sub 15pin x 1 (Blue moulding)
  Audio RCA x 1 (White/Red)
OUTPUT SIGNAL Video Analog (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. Separate (positive & negative,TTL) /
Composite (positive & negative,TTL) /
Sync. on green (negative 0.2 - 0.4Vpp)
OUTPUT TERMINAL Video D-sub 15pin x 1 (Blue moulding)
  Audio RCA x 1 (White/Red)
HDMI
DISPLAY PERFORMANCE Native 1024 x 768 (576i)
INPUT SIGNAL Version Capabilities Ver 1.3a (Specific features IS NOT supported)
  Video Standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video Signal TMDS(TMDS is signal for HDMI)
  Audio Signal Linear PCM
  Input Terminal HDMI x 1
  HDCP Supported
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 lines, PAL: 560 lines (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.75V 75ohm / Cr Cb level
+/-0.35V 75ohm / sync. negative 0.3V or 3-state+/-0.3V on Y) /
Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
  Audio signal 500mVrms / 47k-ohm
INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: D-sub 15pin (Blue moulding)
  Audio RCA x 2 (White/Red )
CONTROL I/O
USB I/O I/O Terminal Type B x1 (for mouse control)
  I/O Speed USB Type B Ver. 2.0
MEMORY I/O
USB I/O I/O Terminal USB Type A x 1(for USB Memory)
  I/O Speed USB Type A Ver. 1.1
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F) > (20%-80% Humidity )
COOL-DOWN PERIOD "Instant off"
START-UP PERIOD Approx. 5 seconds (warm up 30 seconds)
POWER SUPPLY VOLTAGE 100-240V AC±10% 50/60Hz
POWER CONSUMPTION 100-240VAC 3.2-1.4A 50/60Hz Lamp
280W/265W (Lamp on)   2.6W/3.9W (standby)
DIMENSION
EXCLUDE FEET 228(D) x 295(W) x 77(H) mm
MAXIMUM DIMENSION 228(D) x 295(W) x 79(H) mm
WEIGHT Approx. 2.3kg
FAN NOISE  
ECO MODE 29dB
NORMAL MODE 37dB
WARRANTY
STANDARD WARRANTY 2 years*
*excluding lamp
* For more information visit Epson Projector Warranty
ACCESSORIES
POWER CORD 1.8m
COMPUTER CABLE 1.8m, D-sub 15pin (Male) - Mini D-sub 15pin (Male)
USB CABLE 1.8m, A/B
REMOTE CONTROL Included
SOFT CARRYING CASE Included
PASSWORD PROTECT STICKER Included
AIR FILTER Included
OWNER'S MANUAL CD-ROM
PRODUCT OPTIONS
Product Code Item Code Description

 

V13H010L54

 Lamp
  7012084 Ceiling mount standard
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.