Epson EMP-1810

Epson EMP-1810

Corporate Portable Multimedia Projectors

The ultimate solution for high performance presentations.


Overview Specs Consumables Downloads Video

PRODUCT TYPE Portable Multimedia Projector
PRODUCT NAME Epson EMP-1810
PRODUCT CODE V11H233053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.8 inches with MLA ( D5)
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels (1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Cross Stripe
  Refresh Rate 50Hz-60Hz
PROJECTION LENS Type Manual: zoom / focus
  F-number 1.75 - 2.42
  Focus length 24 - 38.2mm
  Zoom ratio 1:1.6
  Offset 6:1
PROJECTION LAMP Type E-TORL 210 W UHE
  Optical System Dichroic Mirror Separation & Prism Combine Method
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch [1.39 to 14.69m] (Zoom: Tele),
30 to 300 inch [0.83 to 9.06m] (Zoom: Wide)
60" screen 1.8m - 2.9m
BRIGHTNESS
  High Brightness Mode 3500 Lumens
(Colour mode: Game, Zoom: Wide)
  Low Brightness Mode 2700 Lumens
(Colour mode: Game, Zoom: Wide)
CONTRAST 500:1
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
SOUND OUTPUT (Internal speaker) 5W monaural
FUNCTION Pointer, User Logo, A/V mute, Freeze, E Zoom, Help
EFFECTIVE SCANNING FREQUENCY RANGE (Analog)
PIXEL CLOCK 13.5MHz to 162MHz
HORIZONTAL 15KHz to 99KHz
VERTICAL 50Hz to 1205Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone / Brightness / Contrast / Tint / Saturation / Sound / Input signal
HEIGHT ADJUSTER Front-centre
TILT ANGLE 0 to 10 degrees
KEYSTONE CORRECTION Vertical: -45 to +45 degrees (Zoom: Tele)
Horizontal: -30 to +30 degrees (Zoom: Tele)
AUTO KEYSTONE CORRECTION Vertical: -30 to +30 degrees (Zoom: Tele)
SOURCE SEARCH Yes
AUTO DETECTION OF RGB / YCbCr Yes
MULTI SCREEN COLOUR ADJUSTMENT Yes
OPERATION PANEL PROTECTION FUNCTION Yes
PASSWORD PROTECTED FUNCTION Yes
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500mVrms / 47K-ohm
VIDEO INPUT TERMINAL   D-sub 15pin x 2 Blue-moulding
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 lines PAL: 560 lines (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / sync negative, 75ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) / Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75ohm / sync negative 0.3V or 3-state +/-0.3V on Y) / Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Audio signal 500mVrms / 47Kohm
VIDEO INPUT TERMINAL   Composite Video: RCA (Yellow) x 1
S-Video: Mini DIN
Component Video: Mini D-sub 15pin Blue-moulding x 2
(in common with Analog RGB connector)
Video-RGB: Mini D-sub 15pin 2 x Blue-moulding
(in common with Analog RGB connector)
USB Display
CONTROL I/O
USB I/O I/O terminal Type B x1 (for mouse control)
  I/O speed Type B x 1: Ver 1.1
SERIAL I/O I/O Terminal D-sub 9 pin x 1
  I/O signal RS232C
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F), (20% - 80% Humidity unfrozen)
Thermal shutdown > 45 degree C
OPERATING ALTITUDE 0m to 2286m < 0ft to 7500ft >
(over 1500m / 4,921ft with high altitude mode)
DIRECT Power On Yes
DIRECT Power Off Yes
COOL-DOWN PERIOD Instant off
START-UP PERIOD Approx. 10 seconds ( Warm up period 30sec )
Exhaust direction side
THEFT PROOF
  Padlock & Security cable connection Yes
  Kensington Lock connection Yes
POWER CONSUMPTION
  lamp On 286W
DIMENSION
EXCLUDE FEET 257(D) x 345(W) x 86(H)mm
MAXIMUM DIMENSION 257(D) x 345(W) x 95(H)mm
WEIGHT Approx. 2.9Kg
FAN NOISE  
HIGH BRIGHTNESS MODE 37dB
LOW BRIGHTNESS MODE 32dB
ACCESSORIES
POWER CORD 3m
COMPUTER CABLE 1.8m, D-sub 15pin (Male) - Mini D-sub 15pin (Male)
REMOTE CONTROL Compact type
BATTERY Alkaline AAA x 2
AUDIO ADAPTER 3.5mm stereo miniplug (male) <-> RCA jack x2 (female) 15cm
SOFT CARRYING CASE Included
LENS COVER Built In
USER MANUAL SET Included (CD-ROM)
PASSWORD PROTECT STICKER Included
OWNER'S MANUAL Included
WARRANTY
STANDARD WARRANTY 2 years*
*excluding lamp
* For more information visit Epson Projector Warranty
PRODUCT CODE V11H233053
PRODUCT OPTIONS
Product Code Item Code Description
ELP-LP40 V13H010L40 Lamp
7012084 7012084 Standard flush Ceiling Mount
7012083 7012083 Ceiling Mount with extendable pole (460mm expandable to 750mm)
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.