PROJECTION SYSTEM	RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD	Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD
Size	0.7inches without MLA (x3)
Driving method	Poly-Silicon TFT Active Matrix
EMP-71
Pixel number	786,432 (1024 x 768) x3
Native resolution	XGA
Aspect ratio	4:3
Pixel arrangement	Stripe
PROJECTION
Type	Manual: focus
F-number	1.5
Focus length	26.3mm
Zoom ratio	Digital (1.0-1.2)
Lens cover	Attached
LAMP
Type	150 W UHE
OPTICAL SYSTEM	Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE)	28 to 300inch (1.0 to 11.0m)
KEYSTONE CORRECTION RATIO	10:1 Fix
BRIGHTNESS	1000 Lumens
CONTRAST	300:1
BRIGHTNESS UNIFORMITY	88%
COLOUR REPRODUCTIVITY	Full colour (16.7 million colours)
SOUND OUTPUT	1W monaural
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK	13.5MHz to 162MHz
HORIZONTAL	15 - 92 KHz
VERTICAL	50 - 85 Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL	Keystone / Brightness / Contrast / Tint / Sound etc.
TILT ANGLE	0 to 11 degrees
KEYSTONE CORRECTION	-15 to 0 to 15 degrees
ANALOGUE RGB / YUV I/O DISPLAY
Native	1024 x 768 pixels
Resize	1280 x 1024 / 800 x 600 / 640 x 480 pixels
INPUT SIGNAL
Signal type	Separate signal
Video signal	Analogue
Sync. signal	Separation / Composite / Sync-on-green (RGB) Sync on Y (YUV)
Audio signal	500m Vrms / 47 K
INPUT TERMINAL
Video	Mini D-sub 15 pin
Audio	Stereo mini jack (RGB) / RCA x 2 (YUV)
OUTPUT SIGNAL
Audio signal	0 - 500m Vrms / 600
OUTPUT TERMINAL
Audio	Stero mini jack (Common Video Audio output) (plug-in, then speaker-off)
VIDEO I/O
RESOLUTION VIDEO
EMP-51	600 TV line
EMP-71	750 TV line
INPUT SIGNAL
Video standard	NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
Video signal	Composite Video / S- Video Component Video: Mini D-Sub 15/pin
Audio signal	500m Vrms / 47 K
INPUT TERMINAL
Video	RCA x 1 / S-Video x 1
Audio	RCA x 2
OUTPUT SIGNAL
Audio signal	0 - 500m Vrms / 600
OUTPUT TERMINAL
Audio	Stereo mini jack (Common Analogue RGB Audio output) (plug-in, then speaker-off)
CONTROL I/O
I/O TERMINAL	Mouse /Serial I/ODIN 9pin x1 / USB type B x1
MOUSE COMPATIBILITY	PS/2, ADB, USB
OPERATING TEMPERATURE	5°C to 35°C (41°F to 95°F) (20% to 80% Humidity)
POWER SUPPLY VOLTAGE	100 - 120V / 200 - 240V ±10%, 50/60Hz AC
DIMENSION
EXCLUDE PROJECTION LENS & FEET	220(D) x 300(W) x 80(H)mm
MAXIMUM DIMENSION	232(D) x 304(W) x 99(H)mm
WEIGHT	Approx. 6.8lbs / 3.1Kg
FAN NOISE	42dB
ACCESSORIES
Power cable (2.7m), Computer cable (1.8m), Video/Audio cable (RCA Cable), Remote Control Unit, AA Battery x 2, User's manual, Soft Case, PS/2 Mouse Cable, USB Mouse Cable
WARRANTY
STANDARD WARRANTY	2 years
PRODUCT CODE
EMP-71	V11H060053
* Specifications are subject to change without notice due to technological improvements.

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.