Epson EMP-73

Epson EMP-73

Entry Level Multimedia Projectors

Quality mobile multimedia XGA Projector ideal for mobile business applications.



PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS LCD
Size 0.7inches with MLA (x3)
Driving method Poly-Silicon TFT Active Matrix
EMP-73
Pixel number 786,432 (1024 x 768) x3
Native resolution XGA
Aspect ratio 4:3
Pixel arrangement Stripe
PROJECTION
Type Manual: zoom / focus
F-number 1.70-1.87
Focus length 21.3-25.6mm
Zoom ratio 1.0:1.2
Lens cover Attached
LAMP
Type 165 W UHE
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300inch (0.9 to 10.5m)
KEYSTONE CORRECTION RATIO 10:1
HIGH BRIGHTNESS 1500 Lumens
LOW BRIGHTNESS 1200 Lumens
CONTRAST 500:1
BRIGHTNESS UNIFORMITY 85%(Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
SOUND OUTPUT 1W monaural
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK 13.5MHz to 162MHz
HORIZONTAL (15 to 92) KHz
VERTICAL (50 to 85) Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone (vertical)/ Brightness / Contrast / Tint / Saturation / Sound/ Input signal etc.
TILT ANGLE 0 to 10 degrees
KEYSTONE CORRECTION Vertical: -15 to +15 degrees
Auto KEYSTONE CORRECTION Yes
ANALOGUE RGB / YUV I/O DISPLAY
Native 1024 x 768 dots
Resize 1600 x 1200 / 1280 X 1024 / 800 x 600 / 640 x 480 pixels
INPUT SIGNAL
Signal type Separate signal
Video signal Analogue(0.7 p-p, 75 ohm/ Mac0.714Vp-p, 75ohm)
Sync. signal Separate(positive&negative, bi-polarity 2-5 Vpp) / Composite(positive&negative, bi-polarity 2-5Vpp) / Sync-on-green(negative, 0.3Vpp)
Audio signal 500m Vrms / 47 K
INPUT TERMINAL
Video Mini D-sub 15 pin x 1 Blue molding
Audio Stereo mini jack
OUTPUT TERMINAL
Video Mini D-sub 15pin x 1 Black molding
VIDEO I/O
DISPLAY PERFORMANCE NTSC: 550 line PAL:550 line (Depend on observation of the multi burst pattern)
INPUT SIGNAL
Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
Video signal Composite Video / S- Video Component / Component Video / Video RGB
Audio signal 500m Vrms / 47 K
INPUT TERMINAL
Video Compostie Video (RCA (yellow) x 1) / S-Video (Mini DIN) / Component Video (Mini D-sub 15pin Blue molding (in common with analog RGB connnector))
Audio RCA (white/red) x 2
CONTROL I/O
I/O TERMINAL RS-232C
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F)
COOL-DOWN PERIOD about 20 seconds
POWER SUPPLY VOLTAGE 100 - 240V ±10%, 50/60Hz AC
DIMENSION
EXCLUDE PROJECTION LENS & FEET 240(D) x 315(W) x 87(H)mm
MAXIMUM DIMENSION 240(D) x 315(W) x 97(H)mm
WEIGHT Approx. 2.9Kg
FAN NOISE 36dB - High Brightness mode
33dB - Low Brightness mode
ACCESSORIES
Power cable (3m), 1.8m, Slim-cable with blue colour jacks, Mini D-sub 15pin (Male) - Mini D-sub 15pin(Male), Video cable(3m,3RCA), Mouse cables (1.8m,USB A/USB B ), Remote control (card type), Soft Carrying Bag, Owners manual.
WARRANTY
STANDARD WARRANTY 2 years
PRODUCT CODE
  V11H106053

Product Options

Product Code Item Code Description
Options
7010180 7010180 Aluminium Briefcase
ELPLP21 V13H010L21 Lamp
ELP ST09 V12H007T09 Presentation Remote Control Kit
ELPKC11 V12H005C11 15Pin to BNC cable
ELP-KC19 V12H005C19 15Pin to Component Video
3YW73 3YW73 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.