Epson SureColor S80660L - 64" CISS

SureColor S80660L - 64

Large Format Printers

High Quality Signage Production



SIZE  
Max Media Width 64 inch
PRINT TECHNOLOGY  
Print Head DUAL PrecisionCore TFP with advanced VSDT, auto nozzle status analysis & integrated guard
Print Operation Print Operation Epson Precision Dot Technology, Intelligent Media Feed System with Advanced Auto Tension Control (ad-ATC), auto head alignment, auto head cleaning, auto media setting, auto skew control, EMX media and print profile management system, self-agitating ink lines, white/metal channel recirculation system.
Print Modes Uni & Bi-directional
Nozzle Configuration 360 x 2 per colour per head
Maximum resolution 1440dpi x 1440dpi
Minimum Ink Droplet Size 4.2pl
INK TECHNOLOGY  
Ink Type Pigment-based Solvent
Ink Family Epson Ultrachrome® GS3 & GS3+RED
Colours C, M, Y, K, Lc, Lm, Lk, Or, Rd + (optional/user adjustable) White or Metal
Storage 10 x 1.5L CISS
Waste System 4L reusable tank
PERFORMANCE  
Max Speed (9c) 95.1m²/hr (360 x 360dpi 1 pass)
Billboard High Speed (9c) 52.3m²/hr (360 x 720dpi 2 pass)
Billboard Production (9c) 31.6m²/hr (720 x 720dpi 4 pass HS)
Banner Production (9c) 18.2m²/hr (720 x 720dpi 6 pass)
Vinyl, Canvas & Paper Production (9c) 13.2m²/hr (720 x 720dpi 8 pass)
+ White (1 Layer) 12.5m²/hr (720 x 720dpi 8 pass)
+ White (2 Layer) 3.5m²/hr (720 x 1440dpi 32 pass)
+ Metal (1 Layer) 4.2m²/hr (720 x 1440dpi 20 pass)
+ Metal (2 Layer) 1.9m²/hr (720 x 1440dpi 40 pass)
Film Production (9c) 6.8m²/hr (720 x 1440dpi 16 pass)
+ White (1 Layer) 6.8m²/hr (720 x 1440dpi 16 pass)
+ White (2 Layer) 3.5m²/hr (720 x 1440dpi 32 pass)
+ Metal (1 Layer) 4.2m²/hr (720 x 1440dpi 20 pass)
+ Metal (2 Layer) 1.9m²/hr (720 x 1440dpi 40 pass)
Figures are based on print speed only and do not include provision for image processing time or transmission. Not all print modes are supported by all media and /or RIP software. Individual results are subject to variation due to a variety of configuration, operational, and image specific factors.
MEDIA SUPPORT  
Loading Single Roll with 2" or 3" core, 250mm max outer diameter, 45kg max weight
Size 300 to 1626mm wide, 500mm min length, 1mm max thickness
Minimum Print Margins 5 mm left & right (10mm with guides)
Platen Gap 1.6/2.0/2.5mm
Heater Settings 30° to 50° C Pre & Platen, 30° to 55° C after (all three heaters individually adjustable)
Dryer Settings On/Off/Auto
Output Format Single sheet (manual cut)
Roll (integrated ATU supports 2" or 3" core with 200mm max outer diameter)
OPERATION  
Control Panel 2.7” Colour LCD
Interface High Speed USB 2.0 & Ethernet 100Base-TX/1000Base-T
Memory Main: 2GB, Network: 128 MB
Power Supply 3 x 220-240V 5A, 50-60 Hz AC
Printer Physical 2,766 x 1,338 x 972 mm (WxHxD), 337Kg (no ink or media)
Control & Utility Software Epson Edge Dashboard, Epson Accounting Tool, Epson Communication Driver, Epson Manuals Launcher, Epson LFP Remote Panel 2, Epson NetConfig, Epson NetSetup, Epson NetPrint, Epson Software Updater
RIP Software Supplied with Epson Edge Print
Also supports a wide range of 3rd party applications
Operational Temp 15° to 35° C (20-32° C recommended)
Operational Humidity 20 to 80% (40 to 60% recommended)
Typical Energy Use 685W Operating / 445W Ready / 25W Sleep
Operating Noise 60.5dB
Operational Space 3.6 x 1.8 x 2.7 m (WxHxD)
WHAT'S IN THE BOX  
Printer, Media Supply System (with Stand, Feed and Auto Take-Up), Print Drying System, CISS unit, 1 x user maintenance kit, 1 x waste tank, 10 x cleaning liquid bags, 1 x 9c ink set (1.5L bags), 1 x roll of Epson Poster Paper, power cables, set-up guide, utility software and user manuals (on CD), RIP software (on DVD).

An internet connection will be required during installation to enable registration and download of additional utility software. A significant proportion of the included ink and cleaning liquid will be used during the setup process to clean and prime ink lines while a small amount of media will also be used for initial print testing. If 10c operation is required an additional White OR Metal ink bag should be ordered.
Packaging (WxHxD) 1 x Head Unit 2,870 x 1021 x 1100 mm, 380Kg
  1 x Media Supply System 3,100 x 607 x 1064 mm, 80Kg
  1 x Continuous Ink Supply System 606 x 912 x 894 mm, 74Kg
  1 x Print Drying System 1,990 x 230 x 365 mm, 15Kg
  1 x Starter Ink & Media Pack 1,400 x 300 x 300 mm, 40Kg
CONFIGURATION OPTIONS  
SCS80660L1YR Printer with 1Yr Warranty
SCS80660L3YR Printer with 1 Yr Wty + 2Yr CoverPlus (3Yrs Total Cover)
SCS80660L5YR Printer with 1 Yr Wty + 2 x 2Yr CoverPlus (5Yrs Total Cover)
Printers supplied through Epson Australia and New Zealand include a comprehensive 1 year on-site warranty that covers parts and labour on all non-consumable components (including the print heads) for product. CoverPlus enables on-site parts and labour service to be extended. One or more CoverPlus packs can be ordered with the printer or separately up to 365 days from the initial date of purchase to enable cover for 1, 2, 3, 4 and 5 year periods (total cover cannot exceed 5 years).

Service and support is provided in conjunction with the Authorised Large Format Reseller through which the product is ordered. Regional locations and certain installation situations may attract additional charges. Service may be restricted or limited when equipment is used outside of specification and/or with non-Epson consumables. For full details on coverage, terms and limitations please review the warranty terms listed on this web-site. If you have questions please contact Epson or one of our Authorised Large Format Resellers.
RELATED PRODUCTS  
SC-S40600 Low to Medium Volume Production
SC-S60600 Medium to High Volume Production
SC-S60660L Medium Volume High Colour Production
SC-S80600 High Volume High Colour Production
   

Usage Conditions
Epson products are designed to give highly reliable use and long life when used according to specifications. With any product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device,do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping), do not make modifications to the product, take care with the use of 3rd party consumables, consult Epson if you have any questions or concerns.