Epson EB-805F

EB-805F

Ultra Short Throw Projectors

Laser projector for retail and corporate signage



PRODUCT NAME EB-805F
PRODUCT CODE V11H923653
TECHNOLOGY  
Projection Technology Epson 3LCD, 3-chip technology
Light Source Laser Diode
Projection System RGB liquid crystal shutter projection system
LCD Panel 0.62-inch (C2fine)
OPTICAL  
Zoom 1 – 1.35 (Digital)
Screen Size 65" to 130" [39.2 cm to 80.3 cm] @16:9 Wide
61" to 120" [39.5 cm to 79.6 cm] @16:6 Wide

48" to 96" [39.2 cm to 80.3 cm] @16:9 Tele
Projection Distance 80" screen at 48.7cm
Throw Ratio 0.27 (Zoom:Wide)
0.37 (Zoom:Tele)
Projection Lens F Number 1.5
Projection Lens Focal Length 3.9 mm
Focus Method Manual
Lens Shift N / A
IMAGE  
Colour Light Output 5,000 lumens
White Light Output 5,000 lumens
Resolution FHD
Native Aspect Ratio 16:9
Contrast Ratio Over 2,500,000:1
Light Source Laser
Colour Reproduction Up to 1.07 billion colours
Colour Processing 10 bit
Keystone Correction Vertical: -3 to +3 degrees
Horizontal: -3 to +3 degrees
Quick Corner Yes
Edgeblend Yes
Content Playback Yes
Refresh Rate 192 Hz / 240 Hz
  *Pixel shifting technology achieves Full HD resolution on screen
CONNECTIVITY  
Video I/O - Input 2 x Monitor in (RGB D-sub 15 pin), 1 x RCA in (composite)
Video I/O - Output 1 x Monitor out (RGB D-sub 15 pin)
Digital Input 3 x HDMI (HDCP 2.3), 1 x HDBaseT (RJ45)
Digital Output 1 x HDMI
Audio I/O - Input 3 x Audio In (Stereo Mini)
Audio I/O - Output 1 x Audio out (Stereo Mini)
Control I/O RS-232C (D-sub 9 pin)
USB I/O 2 x Type A (for USB Memory, Firmware update, copy OSD Settings)
1 x Type A (for Power supply only 5V)
1 x Type B (Firmware update, Copy OSD Settings)
Network I/O: 1 x RJ45
Wireless Connectivity Optional (ELPAP11)
Speaker Output 16W
ADVANCED FEATURES  
Epson Projection Management Software Yes
Epson Content Management Software Yes
Partner Standards Crestron Integrated Partner, Crestron RoomView, Extron IP Link, Extron XTP, AMX Device Discovery, Control4 Simple Device Discovery Protocol
Firmware Update Network via LAN cable,
USB A via USB thumb drive,
USB B via USB cable
Copy OSD settings Network via LAN cable,
USB A via USB thumb drive,
USB B via USB cable
Wireless LAN Security WPA2/WPA3-PSK (Personal),
WPA2/WPA3-EAP (Enterprise)
Instant Off Yes
Direct Power On Yes
Auto Power On Yes
Security Kensington® lock provision
Colour Modes Dynamic
Presentation
Cinema
sRGB
BlackBoard
DICOM SIM
Multi-Projection
Wall Mount Optional (ELPMB62)
GENERAL  
Dimensions D x W x H (excluding feet) 375 x 458 x 209.5 mm
Weight 9.4 kg
Projector Warranty 3 Years
Power Consumption: Projector on 366 W
Power Consumption: Standby 2 W
Noise Level (Normal / Eco) 36 / 27 dB
WHAT'S IN THE BOX  
Main Unit EB-805F Projector
Power Cable 1.8 m
Lens Cap Yes
Remote Control Yes
Battery for Remote Control 2 x AA
Cable Cover Yes
PRODUCT OPTIONS Description
V13H134A56 Air Filter – ELPAF56
V12HA06A06 Projector wall mount – ELPMB62
V12H005A01 Wireless LAN Unit ELPAP11
V12H547053 HDBaseT Transmitter - ELPHD01
2YWEB805F Extended Warranty
(additional 2 years warranty)
2YWEB805FRE Rapid Exchange Service Pack
(additional 2 years warranty + Express within 1-3 days swap)
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.