Epson DG Polyester Pre-Treatment Liquid – 18L

Epson DG Polyester Pre-Treatment Liquid – 18L
Our price: $519.00 $NZ inc GST

Product Code: C13T43R200
(Epson Global Code: C13T43R200)
Suits Products: SureColor F2000 - DTG, SureColor F2160 - DTG, SureColor F3000 - DTG, SureColor F1060 - DTG & DTF, SureColor F2260 - DTG & DTF,


Epson UltraChrome DG Ink was developed for Direct To Garment (DTG) printing. Its primary application is for customisation and value-adding on T-shirts, Polo shirts, jeans and sweats. It can also be used for a range of merchandise and décor production applications including tote bags, tea towels, pillow slips, cushions, etc. It can further be used for customisation on specialty items such as caps, hats and shoes (please consult with your dealer on suitability and sourcing of appropriate platens). The ink adheres best to fabric with a moderate-loose weave and high cotton content. It will also work with a range of alternative natural, man-made, and mixed fibre fabrics, however results will vary with customers strongly recommended to perform print and wash durability testing prior to commencement of production. It should further be noted that ink will generally not adhere to fabric that has a very fine weave, an extremely smooth finish, or has been treated with a water or dirt repellent.

This liquid is designed to assist with ink adhesion (CYMK as well as White) on fabrics with high man-made fibre content. It works best with garments that feature a moderate-loose weave and 50% or more Polyester (for fabric containing 50% or more cotton use C13T43R100 instead). The product is shipped in a bulk format. On dark fabric it is generally used undiluted. With light coloured fabric it should be diluted with distilled water (generally in a ratio of 1:6). Application can be done manually or by a machine using a roller or spray process. For best results a spray based machine is recommended. For further information on usage and application please consult the latest printer &/or product user guides.

IMPORTANT: The liquid should be agitated before use and periodically if left to stand. Never mix pre-treatment liquid with ink or ink waste, even when disposing. Adjust nozzle settings on application equipment when switching between pre-treatment liquids to ensure even and adequate coverage (there are differences in viscosity and application volume requirements). Piling & lint should be removed before liquid application (a standard lint removal tool &/or pair of tweezers can been used). After applications garments should be fully dried (naturally, in a fabric oven, or heat press) and fully flattened prior to commencement of printing (a tool for this is provided with your machine). Failure to follow these instructions may result in damage to fabric and/or damage to the printer that would void Warranty and CoverPlus terms.