Auto Table for SD-10 Out of stock
The Auto Table is an optional accessory for the SD-10 Spectrophotometer that can be purchased separately or as a bundle with the device. It comes complete with Epson Edge Color Lite software which integrates with Epson's RIP software, Epson Edge Print PRO to provide a complete colour management solution. It is designed to common colour issues while enabling consistent and accurate output. Media profiles can be created quickly and easily, colour consistency can be maintained over time and colour can be matched across multiple printers of the same model type.
Colour management is often seen as complex and demanding, requiring high technical skills, and posing challenges for customers. The SD-10 Auto Table addresses this with a simple, straight forward approach.
The SD-10 Auto Table supports colour chart sizes up to 331 mm high, 13 mm thick on a wide range of media in virtually any length. It also detects media position and thickness automatically through the optical sensors. It boasts a compact design (550 x 395 x 128 mm) and weighs just 3.4 kg (excluding the bundled carrycase and an SD-10).
IMPORTANT: This device can be used with most Epson printers. The following list of compatible large format models includes those which ship complete with Epson Edge Print PRO for maximum functionality;
| MEDIA SUPPORT | ||
|---|---|---|
| Media Thickness | Max. 13 mm | |
| Patch Size | 14 mm × 14 mm | |
| Media Size | 331 mm or less × virtually any length | |
| OPERATION | ||
| Software |
Epson Edge Color Lite* *Epson Cloud Solution PORT activation required |
|
| Interfaces | Hi-Speed USB Type-B connector | |
| Supported OS | Windows 8.1 (64bit), Windows 10 （64bit), Windows 11 （64bit) | |
| Physical Size | Device: 550 × 395 × 128 mm (WxDxH) 3.4 kg Carry case: 570 × 415 × 145 mm (WxDxH) |
|
| ENVIRONMENTAL | ||
| Operational Temp | 10° C to 35° C | |
| Operational Humidity | 20% to 80% with no condensation | |
| Storage Temp | Before unpacking: -20 to 60°C *1 After unpacking: -20 to 40°C *2 *1 Can be stored for one month at 40°C, or for 120 hours at 60°C *2 Can be stored for one month at 40°C |
|
| Storage Humidity | 5% to 85% humidity with no condensation | |
| Altitude | 2,000 m or less | |
| Power | 100 - 240 V 0.6A - 0.4A 50/60 Hz AC | |
| Pollution degree | PD2 | |
| IP Protection Class | IPX0 | |
| WHAT'S IN THE BOX | ||
| Auto Table, Carry case, AC cable, USB cable, CD-ROM with licence document, Paper manual, Masking tape
|
||
| CONFIGURATION OPTIONS* | ||
| B42B900311 | Auto Table for SD-10 with 1Yr Warranty | |
| AUTOTABLE3YR | Auto Table for SD-10 with 1Yr Wty + 2Yr CoverPlus (3yr total cover) | |
| AUTOTABLE5YR | Auto Table for SD-10 with 1Yr Wty + 4Yr CoverPlus (5yr total cover) | |
| SD10TABLE1YR | SD-10 + Auto Table for SD-10 with 1Yr Warranty | |
| SD10TABLE3YR | SD-10 + Auto Table for SD-10 with 1Yr Wty + 2Yr CoverPlus (3yr total cover) | |
| SD10TABLE5YR | SD-10 + Auto Table for SD-10 with 1Yr Wty + 4Yr CoverPlus (5yr total cover) | |
| SERVICE & SUPPORT | ||
|
The Auto Table is covered by a comprehensive 1 year exchange warranty that covers all non-consumable parts. Cover can be extended up to a maximum of 5 years through purchase of optional CoverPlus either with the Auto Table printer or up to 365 days subsequent to purchase (discounts apply for bundled purchase). |
||
Find drivers, manuals and product setup for Auto Table for SD-10.
Go to Driver DownloadsThe Auto Table is an optional accessory for the SD-10 Spectrophotometer that can be purchased separately or as a bundle with the device. It comes complete with Epson Edge Color Lite software which integrates with Epson's RIP software, Epson Edge Print PRO to provide a complete colour management solution. It is designed to common colour issues while enabling consistent and accurate output. Media profiles can be created quickly and easily, colour consistency can be maintained over time and colour can be matched across multiple printers of the same model type.
Colour management is often seen as complex and demanding, requiring high technical skills, and posing challenges for customers. The SD-10 Auto Table addresses this with a simple, straight forward approach.
The SD-10 Auto Table supports colour chart sizes up to 331 mm high, 13 mm thick on a wide range of media in virtually any length. It also detects media position and thickness automatically through the optical sensors. It boasts a compact design (550 x 395 x 128 mm) and weighs just 3.4 kg (excluding the bundled carrycase and an SD-10).
IMPORTANT: This device can be used with most Epson printers. The following list of compatible large format models includes those which ship complete with Epson Edge Print PRO for maximum functionality;
| MEDIA SUPPORT | ||
|---|---|---|
| Media Thickness | Max. 13 mm | |
| Patch Size | 14 mm × 14 mm | |
| Media Size | 331 mm or less × virtually any length | |
| OPERATION | ||
| Software |
Epson Edge Color Lite* *Epson Cloud Solution PORT activation required |
|
| Interfaces | Hi-Speed USB Type-B connector | |
| Supported OS | Windows 8.1 (64bit), Windows 10 （64bit), Windows 11 （64bit) | |
| Physical Size | Device: 550 × 395 × 128 mm (WxDxH) 3.4 kg Carry case: 570 × 415 × 145 mm (WxDxH) |
|
| ENVIRONMENTAL | ||
| Operational Temp | 10° C to 35° C | |
| Operational Humidity | 20% to 80% with no condensation | |
| Storage Temp | Before unpacking: -20 to 60°C *1 After unpacking: -20 to 40°C *2 *1 Can be stored for one month at 40°C, or for 120 hours at 60°C *2 Can be stored for one month at 40°C |
|
| Storage Humidity | 5% to 85% humidity with no condensation | |
| Altitude | 2,000 m or less | |
| Power | 100 - 240 V 0.6A - 0.4A 50/60 Hz AC | |
| Pollution degree | PD2 | |
| IP Protection Class | IPX0 | |
| WHAT'S IN THE BOX | ||
| Auto Table, Carry case, AC cable, USB cable, CD-ROM with licence document, Paper manual, Masking tape
|
||
| CONFIGURATION OPTIONS* | ||
| B42B900311 | Auto Table for SD-10 with 1Yr Warranty | |
| AUTOTABLE3YR | Auto Table for SD-10 with 1Yr Wty + 2Yr CoverPlus (3yr total cover) | |
| AUTOTABLE5YR | Auto Table for SD-10 with 1Yr Wty + 4Yr CoverPlus (5yr total cover) | |
| SD10TABLE1YR | SD-10 + Auto Table for SD-10 with 1Yr Warranty | |
| SD10TABLE3YR | SD-10 + Auto Table for SD-10 with 1Yr Wty + 2Yr CoverPlus (3yr total cover) | |
| SD10TABLE5YR | SD-10 + Auto Table for SD-10 with 1Yr Wty + 4Yr CoverPlus (5yr total cover) | |
| SERVICE & SUPPORT | ||
|
The Auto Table is covered by a comprehensive 1 year exchange warranty that covers all non-consumable parts. Cover can be extended up to a maximum of 5 years through purchase of optional CoverPlus either with the Auto Table printer or up to 365 days subsequent to purchase (discounts apply for bundled purchase). |
||